Analysis of The Application of Hazard Identification Risk Assessment and Control (HIRAC) In Supporting Zero Fatality Targets at PT. Solusi Bangun Andalas
Fakhri Kamal, Mukhlis*, & Mahdani
Management Department, Universitas Syiah Kuala, Indonesia
DOI – http://doi.org/10.37502/IJSMR.2025.8309
Abstract
This study explores the application of Hazard Identification, Risk Assessment, and Control (HIRAC) to support the Zero Fatality Target at PT. Solusi Bangun Andalas (SBA) company. It employs a descriptive phenomenological approach, focusing on the experiences and insights of individuals directly involved in identifying hazards, assessing risks, and managing potential threats in their work environment. This research analyzes 244 safety reports from 2016 to 2022 at SBA, focusing on the most frequently encountered issues for further examination through the HIRAC framework. Specifically, it highlights the problems of cable short circuits and falling objects. A cable short circuit is recognized as a potential hazard caused by both internal and external exposure of cables. Falling objects pose another risk, stemming from materials that may fall from heights during specific activities. The application of HIRAC at SBA has proven effective in reducing the incidence rates and consequences associated with unsafe conditions, ultimately enhancing the occupational safety and health of workers.
Keywords: HIRAC, Cable short circuit, falling objects, Zero Fatality, Occupational Safety and Health
References
- Alfianto, R. (2015). Evaluasi Penggunaan Pemutus Tenaga (PMT) pada Gardu Induk Sungai Juaro Palembang. Politeknik Negeri Sriwijaya.
- Badaruddin, & Arsyad, M. I. (2016). Analisa Gangguan Hubung Singkat Dengan Menggunakan Etap 12.6.0 pada Pt X. Jurnal Teknik, 5(1), 60–68. https://doi.org/http://dx.doi.org/10.31000/jt.v5i1.338
- Daryaningrum, H., Pujotomo, D., & Puspitasari, N. B. (2015). Manajemen Risiko Keselamatan dan Kesehatan Kerja (k3) Pekerja Pada Bagian Produksi Pengolahan Kayu dengan Metode JSA (Job Safety Analysis) PT. Kharisma Jaya Gemilang. Industrial Engineering Online Journal, 4(2), 1–12.
- Dharma, A. A. B. (2017). Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Pembangunan Jambuluwuk Hotel & Resort Petitenget. Jurnal Spektran, 5(1), 47–55. https://doi.org/10.24843/SPEKTRAN.2017.v05.i01.p06
- Fadli, M. R. (2021). Memahami desain metode penelitian kualitatif. Humanika, 21(1), 33–54. https://doi.org/10.21831/hum.v21i1
- Jaiswal, H. A., Park, C. Y., & Smith, A. M. (2014). Understanding workers’ perceptions of Hazard Identification and Risk assessment. Safety Science, 57, 102–111.
- Kabul, E. R., & Yafi, F. (2022). Pendekatan Metode HIRARC sebagai Alat Analisis dalam Membentuk Manajemen dan Budaya Keselamatan Kesehatan Kerja. Sosiohumaniora, 24(2), 220–228. https://doi.org/10.24198/sosiohumaniora.v24i2.38525
- Karundeng, I., Doda, D. V., & Tucunan, A. A. T. (2018). Analisis Bahaya Dan Risiko Dengan Metode Hirarc Di Departement Production PT.Samudera Mulia Abadi Mining Contractor Likupang Minahahsa Utara. KESMAS: Jurnal Kesehatan Masyarakat Universitas Sam Ratulangi, 7(4), 1–7.
- Kumolo, C. (2016). Analisis Aliran Beban pada Sistem Tenaga Listrik di KSO Pertamina EP – GEO Cepu Indonesia Distrik 1 Kawengan menggunakan Software ETAP 12.6. Emitor: Jurnal Teknik Elektro, 16(1), 1–15.
- Kuswana, W. S. (2019). Ergonomi dan K3 (4th ed.). PT Remaja Rosdakarya.
- Marsudi, D. (2005). Pembangkitan energi listrik (W. Santika & L. Simarmata (eds.); 3 Vol 2). Erlangga.
- Mauliyani, H., Romdhona, N., Andriyani, & Fauziah, M. (2022). Identifikasi resiko keselamatan kerja metode (HIRAC) pada tahap pembuatan tanki. Environmental Occupational Health and Safety, 2(2), 163–174. https://doi.org/10.24853/eohjs.2.2.163-174
- Munawir, R., & Hapsari, D. C. (2021). Mengkaji Pola Pelatihan Jarak Jauh Bidang Konstruksi sebagai Proses Sertifikasi dan Peningkatan Kompetensi Tenaga Kerja Konstruksi. Kementerian Pekerjaan Umum dan Perumahan Rakyat.
- Novianti, D. (2013). Kebermaknaan Hidup Penyandang Disabilitas Fisik Yang Berwirausaha : Penelitian Fenomenologi Pada Tiga Orang Penyandang Disabilitas Fisik yang Berwirausaha di Kota Bandung. Universitas Pendidikan Indonesia.
- Nurdiana, N. (2016). Analisa Gangguan Arus Hubung Singkat pada Penyulang Nakula Gardu Induk Talang Kelapa. Jurnal Ampere, 1(1), 26–36. https://doi.org/10.31851/ampere.v1i1.475
- Puspitasari, N. (2010). Hazard Identifikasi dan Risk Assesment dalam Upaya Mengurangi Tingkat Risiko Di Bagian Produksi PT.Bina Guna Kimia Ungaran. Universitas Sebelas Maret.
- Rachman, I., & Subiyanto, L. (2017). Implementasi Murray-Varley Bridge Berbasis Mikrokontroler untuk Mendeteksi Letak Hubung Singkat (Short Circuit) Kabel Listrik. Seminar MASTER PPNS, 2(1), 73–78.
- Ramadhan, R. M., Kusnadi, & Suseno, A. (2021). Analisis Pengendalian Risiko Kecelakaan Kerja Menggunakan Metode Hirarc Pada Area Produksi CV. Artana Engineering. Jurnal TEKNIKA, 15(1), 115–130. https://doi.org/10.5281/zenodo.7326983
- Ramli, S. (2010). Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. Dian Rakyat.
- Saeed, Y. S. (2017). Safety Management In Construction Projects. The Journal of The University of Duhok, 20(1), 546–560. https://doi.org/10.26682/sjuod.2017.20.1.48
- Suma’mur. (2014). Higiene perusahaan dan kesehatan kerja (Hiperkes) (2nd ed.). Sagung Seto.
- (2015). Identifikasi Bahaya dan Penilaian Risiko K3 pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRAC (Hazard Identification and Risk Assessment Control) pada PT. X. In Prosiding Seminar Nasional Riset Terapan. Prosiding Seminar Nasional Riset Terapan, 281–286.
- Supriyadi, S., & Ramdan, F. (2017). Hazard Identification and Risk Assessment In Boiler Division using Hazard Identification Risk Assessment and Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health, 1(2), 161–177.
- Suwardi, & Daryanto. (2018). Pedoman Praktis K3LH (Keselamatan dan Kesehatan Kerja dan Lingkungan). Penerbit Gaya Media.
- Wati, S., & Nugroho, A. J. (2023). Analisis resiko kecelakaan kerja dengan metode Hazard Identification Risk assessment and Control. Jurnal Penelitian Rumpun Ilmu Teknik, 2(3), 227–244. https://doi.org/10.55606/juprit.v2i3.2256
- Wu, W., Yang, H., Li, Q., & Chew, D. A. S. (2013). An integrated information management model for proactive prevention of struck-by-falling-object accidents on construction sites. Automation in Construction, 24, 67–74. https://doi.org/10.1016/j.autcon.2012.10.010